How to remove Glitter Crayons from marble

ProcedureSpray a small amount of WD-40 on a soft cloth and also on the stained surface. Hold the cloth on the stain for about 15 seconds. Using the cloth gently wipe and lift simultaneously (do not rub the stain; this will create smearing and ultimately increase the size of the stain). If residue remains, wipe the surface with a damp sponge.If the stain still exists. saturate a cotton ball with rubbing alcohol and blot the remaining stain for 15 seconds. Promptly remove the alcohol with a damp sponge moistened with liquid dish detergent.Special Precautions:Some wallpapers and painted surfaces will blemish very easily. Only blot (never rub) the stain with rubbing alcohol for short periods of time and rinse the alcohol promptly with a damp sponge. Repeat as necessary.

Please Note...

The suggestions for removing stains have been compiled as a service to our consumers. We are unable to guarantee or be responsible for the results obtained by these procedures. You may also wish to consult your local cleaner for further recommendations.

Before attempting the stain removal method, test each procedure on an inconspicuous area of the material or surface to be cleaned. Please be advised these stain removal methods involve hazardous products and are intended only for adult use. Crayola does not recommend children attempt these procedures.

In many procedures, specific brands of products are recommended. These are brands that performed most effectively in our laboratory. Always check individual containers for recommended procedures and warnings. Competitive brand products may work equally well.

For additional assistance, contact us toll-free at 800-272-9652 weekdays between 9 AM and 4 PM Eastern Time.